Construction Laborer
Muniz Concrete & Contracting, Inc.
📍 Austin, TX · Travis County
- ✔ Moradia oferecida
- ✔ Transporte diário
- ✔ Pode ter hora extra
- ✔ Treinamento oferecido
- ✔ Ferramentas e equipamentos fornecidos
Como se candidatar
Entre em contato direto com o empregador. Em inglês, diga a função e o número do caso. Número do caso: H-400-26185-078542
- 📞 Telefone: +1 (512) 788-0411
- ✉️ E-mail: claudia@munizcontracting.com
✉️ Modelo de e-mail em inglês para se candidatar
Troque o que está entre colchetes [ ] pelos seus dados. Se o empregador pediu outro jeito de se candidatar, siga as instruções dele.
Subject: Application for Construction Laborer (H-2B) - Case H-400-26185-078542
O que vai fazer
Texto original em inglês, como foi registrado no Departamento do Trabalho.
***RFI Response***
The worker will operate the following motorized equipment: Skid-Steer Loader, type: Skid-Steer Loader; Make/Model: Bobcat S770; Size: 131.4-inch hingepin height; Weight: 9,314 lbs; Horsepower: 92 HP. Used to excavate, grade, backfill, load, transport, and move dirt, gravel, concrete, demolition debris, and other construction materials and to prepare worksites. Quick Saw/Concrete Saw, type: Handheld Gas-Powered Cut-Off Saw; Make/Model: STIHL TS 420; Size: 14-inch blade; Weight: 21.5 lbs; Horsepower: 4.4 HP. Used to cut concrete, asphalt, masonry, brick, block, pipe, and expansion joints. Walk-Behind Concrete Saw, type: Walk-Behind Concrete Saw; Make/Model: Husqvarna FS 400 LV; Size: 20-inch blade; Weight: approximately 220 lbs; Horsepower: 11.7 HP. Used to cut concrete slabs, sidewalks, driveways, roads, control joints, utility trenches, and repair areas requiring straight, deep cuts. Mini Excavator, type: Compact Excavator; Make/Model: 2019 Bobcat E42; Size: Maximum digging depth approximately 10.5 feet; Weight: 9,246 lbs; Horsepower: 42.7 HP. Used for digging, trenching, grading, backfilling, site preparation, drainage work, utility installation, and small-scale demolition. The worker measures reinforcing steel (rebar) using a tape measure and marks the required lengths according to project specifications. Rebar is cut using manual or hydraulic rebar cutters and, when necessary, bent using manual or mechanical rebar benders to achieve the required shape. The worker positions reinforcing steel according to project layouts, ties intersecting bars using tie wire and rebar-tying pliers, verifies proper alignment, spacing, and support before concrete placement, and installs rebar chairs and spacers to maintain proper reinforcement placement. The worker may also lift, carry, and place reinforcing steel and reinforcing materials as part of general construction labor duties. Tools, equipment, and materials used to cut and install rebar include tape measures, chalk lines or marking tools, manual or hydraulic rebar cutters, manual or mechanical rebar benders, rebar-tying pliers or tying tools, tie wire, rebar chairs, spacers, levels, and required personal protective equipment.
***Original Duties***
Perform tasks involving physical labor at construction sites. May operate hand and power tools of all types: Tape measurement, hammer, level, float, concrete groover, pliers, shovel concrete placer, wire reel, electric circular saw, hand drill, impact drill, concrete saw (different sizes), concrete vibrator, grinder, plate compactor, jumping jack, skid steer, and a variety of other equipment and instruments. Unload materials and bring them to the form-work location. Clean and prepare sites, dig trenches, set braces to support the sides of excavations, identify and cut wood depending on the needs. Smooth or finish freshly poured cement or concrete. After the concrete is poured, and cured, remove all formwork, and clean the wood for reuse. The worker should safely cut, install, rebar, level, and finish according to needs. Worker will also apply curing compound to the concrete. Smooth or finish freshly poured cement or concrete. After the concrete is poured and cured, the worker will remove all formwork and clean the wood for reuse. The worker should safely cut, install, rebar, level, and finish according to needs and perform general clean-up of worksite every day to keep the site safe.
Requisitos
| Escolaridade | Nenhuma exigida |
|---|---|
| Experiência | Não exige |
Benefícios e condições
| Horário | 7:00 A.M. – 5:00 P.M. |
|---|---|
| Descontos no salário | Employers will deduct all legally required amounts from workers' paychecks. Housing will be provided by the employer but with a weekly charge of $125.00. The Employer will make all deductions required by law. The offered housing is optional for workers. |
Outros locais de trabalho
- Austin, TX · 1 de out. de 2026 – 15 de dez. de 2026 · 18 vagas
- Multiple Cities And Towns, TX · 1 de out. de 2026 – 15 de dez. de 2026 · 18 vagas
- Multiple Cities And Towns, TX · 1 de out. de 2026 – 15 de dez. de 2026 · 18 vagas
- Multiple Cities And Towns, TX · 1 de out. de 2026 – 15 de dez. de 2026 · 18 vagas
- Multiple Cities And Towns, TX · 1 de out. de 2026 – 15 de dez. de 2026 · 18 vagas
- Multiple Cities And Towns, TX · 1 de out. de 2026 – 15 de dez. de 2026 · 18 vagas
| Número do caso | H-400-26185-078542 |
|---|---|
| Ocupação oficial | Operating Engineers and Other Construction Equipment Operators (47-2073.00) |
| Agente ou advogado do empregador | Farmer Law PC |
| Publicada em | 11 de ago. de 2026 |